♻️

About This Location

Pacific Steel & Recycling at 130 Hudson Street in Mills, Wyoming is a full-service scrap metal buying and recycling yard serving Natrona County and the greater Casper area. The facility accepts nearly all varieties of ferrous and non-ferrous metals — including vehicles, appliances, catalytic converters, aluminum, copper, brass, and steel — as well as consumer electronics for e-recycling. A 100% employee-owned company, Pacific Steel pays cash or check for your scrap (depending on material type) with no minimum load required. The yard is open Monday through Friday, 8:00 AM to 5:00 PM, and also sells new and used steel products on-site.

What Pacific Steel & Recycling Accepts

✓ Ferrous metals – mild steel, carbon steel, cast iron, wrought iron (Purchased by the ton; no minimum load required.)
✓ Stainless steel (Purchased as non-ferrous; paid by the pound.)
✓ Aluminum (cans, scrap, siding) (Paid by the pound.)
✓ Copper (bare and insulated wire) (Paid by the pound.)
✓ Brass / Red brass / Yellow brass (Paid by the pound.)
✓ Radiators (Accepted as non-ferrous.)
✓ Lead and lead-acid batteries (Accepted; automotive batteries explicitly listed.)
✓ Vehicles / car bodies (Purchased for scrap; no stated minimum.)
✓ Catalytic converters (Accepted; bring vehicle title or active registration plus valid photo ID.)
✓ Appliances / white goods (refrigerators, water heaters, washers, etc.) (Freon/CFCs must be drained from refrigeration appliances before drop-off.)
✓ Tin cans / sheet metal / rebar / plate steel (General ferrous scrap accepted.)
✓ Electronics / e-scrap (laptops, PCs, cell phones, circuit boards, servers, hard drives, power supplies, network equipment, digital cable boxes) (Pacific's e-recycling program. TVs are NOT accepted.)
✓ Die cast / alloy wheels (Listed as non-ferrous material.)

Related recycling guides: Electronics · Batteries · Appliances

What they do not accept

✕ Televisions
✕ Hazardous materials (flammables, corrosives, toxics, liquids including oil, gasoline, antifreeze)
✕ Radioactive materials
✕ Closed / pressurized containers
✕ Non-metals (dirt, concrete, wood, garbage)
✕ Non-lead-acid batteries (alkaline, lithium, NiCd, etc.)
✕ Asbestos-containing materials
✕ PCBs (polychlorinated biphenyls)
✕ Plastics (unconfirmed for this branch)

Call (307) 234-6006 to confirm edge-case materials. Refrigeration appliances must have Freon/CFCs certified as removed before being accepted.

Fees

  • Scrap metal drop-off (general) — No charge to drop off; facility PAYS you by weight (ferrous: per ton; non-ferrous: per pound). Prices vary with commodity markets — call for current rates.

Access & restrictions

Public drop-off open to individuals, households, and commercial/contractor customers. Walk-in sellers welcome with no appointment needed. · No minimum load. Sorting your load by material type may result in higher payment than a mixed load. Payment for ferrous metals is cash; non-ferrous metals (copper, brass, aluminum, etc.) are paid by check.

Programs & events

  • E-Recycling Program — Accepts laptops, PCs, cell phones, servers, circuit boards, hard drives, power supplies, and network equipment. TVs not accepted. Designed to ensure electronics are disposed of safely and responsibly.
  • Railcar Recycling — The official Pacific Steel website lists Railcar Recycling as a service offered at this location, in addition to Steel and standard Recycling services.
  • New & Used Steel Sales — In addition to recycling, the Mills location sells new steel products (bar stock, plate, structural) and used steel. Orders can be cut to length and delivered.

Materials, fees and hours can change — call ahead to confirm before your visit.

Frequently Asked Questions

Do I need an appointment to drop off scrap metal in Mills?

No appointment is needed. The facility welcomes walk-in sellers Monday through Friday, 8:00 AM to 5:00 PM. Simply bring your scrap and they will weigh and purchase it on the spot.

Is there a minimum amount of scrap I need to bring?

No. Pacific Steel & Recycling states there is no minimum — and no maximum — for loads brought in by walk-in sellers.

How does payment work — do I get cash?

Ferrous metals (steel, appliances, car bodies) are paid in cash. Non-ferrous metals (copper, brass, aluminum, etc.) are paid by check. Prices are based on current commodity market rates, so call (307) 234-6006 for today's pricing before you haul.

Can I recycle my catalytic converter here, and do I need any documents?

Yes, catalytic converters are accepted. You must bring a valid government-issued photo ID plus the vehicle title or active registration so the facility can make a copy. Expect payment by check rather than cash for this material.

Does Pacific Steel & Recycling in Mills accept electronics and appliances?

Yes — the facility accepts consumer electronics (laptops, PCs, cell phones, circuit boards, servers, etc.) through its e-recycling program, and accepts appliances such as refrigerators, washers, and water heaters as ferrous/white goods scrap. Note: televisions are not accepted, and refrigeration appliances must have Freon/CFCs certified as removed before drop-off.

Last verified: November 2026. Sources: source · source · source · source. Spotted something wrong? Suggest a correction.

Contact & Location

📍
Address
130 Hudson St, Mills, WY 82604
📞
🌐
🏙
City / State
Mills, Wyoming

Opening Hours

Monday 8:00 AM – 5:00 PM
Tuesday 8:00 AM – 5:00 PM
Wednesday 8:00 AM – 5:00 PM
Thursday 8:00 AM – 5:00 PM
Friday 8:00 AM – 5:00 PM
Saturday Closed
Sunday Closed
← All centers in Mills